Kansas State University

  1. K-State Home
  2. »Agronomy Home
  3. »K-State Agronomy eUpdates
  4. »eUpdate 709 September 7th, 2018»Rate of dry down in corn before harvest

K-State Agronomy eUpdates

Department of Agronomy

Kansas State University

1712 Claflin Rd.

2004 Throckmorton PSC

Manhatan, KS 66506

785-532-6101

agronomy@ksu.edu

Extension Agronomy

Rate of dry down in corn before harvest


The latest USDA-National Agricultural Statistics Service crop progress and condition report classified more than 40% of the corn crop as ‘good’ or ‘excellent’ condition. Overall, 36% of Kansas’ corn is mature with only 6% harvested.

The weather conditions experienced from early-August to early-September are critical for corn as related to the grain-filling rate and determining final grain weight. Temperature and precipitation have split across the state, with cooler-than-normal conditions in the northwest and warmer conditions in the northeast (Figure 1a). An area of north central Kansas had excessive moisture; however much of the state had near-normal precipitation for the period (Figure 1b).
 

Figure 1. a) Departure from normal temperatures; b) Departure from normal precipitation.


In recent years, a common question from producers relates to the dry down rate for corn when approaching the end of the season. Based on previous information, the average dry down rate depends on the weather, primarily temperature and moisture conditions – but it might range from 1% in late August to less than 0.5% per day in October.

The weather outlook for September calls for an increased chance of warmer-than-normal temperatures with chances for above-normal precipitation.  Much of this rainfall may have fallen already, which would favor a faster dry down rate than average.

Grain water loss occurs at different rates but with two distinct phases: 1) before “black layer” or maturity (Figure 2), and 2) after black layer. For the first phase, Table 1 contains information on changes in grain moisture from dent until maturity of the corn.

 

https://webapp.agron.ksu.edu/agr_social/lib/Filemanager/userfiles/09292017/Corn-dry-down-F02.gif

Figure 2. Corn at dent stage and at black layer growth stages. Photo and infographic prepared by Ignacio Ciampitti, K-State Research and Extension.

 

Table 1. Growth stages, moisture content, and total dry matter progression for corn from late to physiological maturity. Extracted from K-State Research and Extension publication MF3305 (Ciampitti, Elmore, Lauer, 2016).

https://webapp.agron.ksu.edu/agr_social/lib/Filemanager/userfiles/09292017/Corn-dry-down-F03.gif

 

To properly address questions from many producers on the rate of dry down, a study is underway to investigate the grain dry down rate from the moment of “black layer” until commercial harvest grain moisture was reached. For the conditions experienced in 2017 (from late August until mid-September), the overall dry down rate was around 1% per day (from 35% to 13% grain moisture) – taking an overall period of 23 days (Figure 3).

 

https://webapp.agron.ksu.edu/agr_social/lib/Filemanager/userfiles/09292017/Corn-dry-down-F04.gif

Figure 3. Grain moisture dry down (orange line) across three hybrids and different N rates near Manhattan, KS. Horizontal dashed lines marked the 35% grain moisture at black layer formation and 13% grain moisture around harvest time*. Graph prepared by Ignacio Ciampitti, K-State Research and Extension.

*Note: It is desired to reach harvest with 15.5% grain moisture to maximize the final grain volume to be sold, thus the importance of timing harvest with the right grain moisture content.

This dry down process can be delayed by:

  • Low temperatures
  • High humidity
  • High grain moisture content at black layer (38-40%)

It is expected that the dry down rate will decrease to <0.5% per day for late-planted corn entering reproductive stages later in the growing season. Expect a similar decrease for corn that was exposed to late-season stress conditions (e.g., drought, heat). Under these conditions, maturity may be reached with high grain water content and the last stages after black layer formation could face lower temperatures and higher humidity. These main factors should be considered when the time comes to schedule corn harvest.  You can track temperature and humidity levels on the Kansas Mesonet web site at http://mesonet.k-state.edu/weather/historical/ by selecting the station and time period of interest.

This project is expected to be expanded in the coming years to include additional corn producing regions and to consider other factors such as planting date, hybrid maturity, and diverse weather environments across the state. If you are interested in participating, please contact the researchers listed below.

 

 

Ignacio A. Ciampitti, Crop Production and Cropping Systems Specialist
ciampitti@ksu.edu

Javier Fernandez, Fulbright Scholar, KSUCROPS Production, Dr. Ciampitti’s Lab
jafernandez@ksu.edu

Mary Knapp, Weather Data Library
mknapp@ksu.edu