Fall Soil Sampling: Instructions for sample collection and submission to K-State Soil Testing Lab
Soil testing provides producers and homeowners important information concerning the fertility status of the soil. This information can lead to better crops and reduce costs by guiding management decisions like the type and amount of fertilizers to apply. If you plan to do your own soil sampling and use the K-State Soil Testing Laboratory, the following provides specific information on soil sample collection methods and mailing instructions.
- To take a sample, you will need a probe, auger or spade, and a clean pail. (If you’re also having the soil analyzed for zinc, be sure to use a plastic container to avoid contamination from galvanized buckets or material made of rubber.) You will also need soil sample containers and a soil information sheet from your local Extension office or fertilizer dealer. You can also order soil sample bags online from K-State Research and Extension by clicking here.
- Draw a map of the sample area on the information sheet and divide your fields into uniform areas. Each area should have the same soil texture, color, slope, and fertilization and cropping history.
- From each area, take a sample of 20-30 cores or slices for best results. At the very minimum, 10-15 cores should be taken per sample. Mix the cores thoroughly in a clean container and fill your soil sample container. For available nitrogen, chloride, or sulfur tests, a subsoil sample to 24 inches is necessary.
- Avoid sampling in old fencerows, dead furrows, low spots, feeding areas, or other areas that might give unusual results. If information is desired on these unusual areas, obtain a separate sample from the area.
- Be sure to label the soil container clearly and record the numbers on the soil container and the information sheet.
- Air dry the samples as soon as possible for the available nitrogen test. (Air drying before shipment is recommended, but not essential, for all other tests.) Do not use heat for drying.
- Fill out the information sheet obtained from your Extension office, or download a sheet here.
- Take the samples to your local Research and Extension office for shipping. Samples may also be sent directly to the lab by placing them in a shipping container. Information sheets should be included with the package. Shipping labels can be printed from the Soil Testing Lab website listed below. Mail the package to:
Soil Testing Laboratory
2308 Throckmorton PSC
1712 Claflin Road
Manhattan, KS 66506-5503
A listing of the types of soil analysis offered, and the costs, is available on the Soil Testing Lab web site, http://www.agronomy.k-state.edu/services/soiltesting . You can also contact the lab by email at firstname.lastname@example.org and by phone at 785-532-7897.
For more information on the proper procedures for the Soil Testing Laboratory, see K-State publication MF-734 at: https://www.bookstore.ksre.k-state.edu/pubs/MF734.pdf. Detailed information on soil sample collection can be found in the accompanying article “The challenge of collecting a representative soil sample” in this eUpdate issue.
Dorivar Ruiz Diaz, Nutrient Management Specialist