Kansas State University

  1. K-State Home
  2. »Agronomy Home
  3. »K-State Agronomy eUpdates
  4. »eUpdate 545 January 22nd, 2016»Plan now for good marestail control in soybeans

K-State Agronomy eUpdates

Department of Agronomy

Kansas State University

1712 Claflin Rd.

2004 Throckmorton PSC

Manhatan, KS 66506

785-532-6101

agronomy@ksu.edu

Extension Agronomy

Plan now for good marestail control in soybeans

Controlling glyphosate-resistant marestail in soybeans continues to be a big challenge for Kansas no-till producers. Because soybeans are generally planted later in the season, and marestail generally germinates in the fall or early spring, application timing and weed size are critical factors to successful control.

Figure 1. Glyphosate-resistant marestail in soybeans. Photo by Dallas Peterson, K-State Research and Extension.

 

In the early spring, using a growth regulator herbicide like 2,4-D and/or dicamba is an inexpensive and effective option to control rosette marestail. Dicamba has provided better control than 2,4-D and will also provide some residual control, especially at higher use rates. A combination of the two will give broader spectrum weed control than either one alone. Recent observations in Kansas suggests marestail will bolt in April throughout most of the state, so timing control before the end of March is recommended.

In addition, using a herbicide with longer residual control of marestail helps with weeds that germinate between treatment and soybean planting. Products that include Canopy EX, Autumn Super, Classic, FirstRate, Sharpen, metribuzin, or Valor can help provide residual control against several broadleaf species including marestail. However, it is very important to consult and follow the herbicide label guidelines for the required preplant intervals prior to planting soybeans.

As soybean planting nears, existing marestail plants can become difficult to control because plants will have bolted and be considerably larger. Herbicides to apply as a burndown prior to planting include tank mixes of glyphosate with FirstRate, Classic, Sharpen, Optill, or  2,4-D. Be very careful to follow label directions when using 2,4-D prior to soybean planting. The plant-back restriction ahead of soybean can range from 7-30 days depending on rate and formulation. Sharpen generally provides good marestail control and can be applied any time before soybean emergence. However, it is still most effective if applied before marestail starts to bolt, in a tank-mix with other herbicides, when used with methylated seed oil, and at spray volumes of 15 gallons per acre or more. 

One additional herbicide to consider as a rescue burndown application to control bolting marestail prior to soybean planting is Liberty. Although, it would be better to control marestail at an earlier stage of growth, Liberty has been one of the most effective herbicides to control bolting marestail.  Liberty also has broad spectrum non-selective activity on other broadleaf and grass species if treated at a young growth stage. Liberty is primarily a contact herbicide, so a spray volume of 15 gallons per acre or greater generally provides the most consistent weed control. Liberty tends to work best under higher humidity and warm sunny conditions at application.

Controlling marestail in the growing soybean crop can be the biggest challenge for producers. Glyphosate alone is often not effective on larger plants or glyphosate-resistant marestail. The most successful treatments for large marestail in Roundup Ready soybeans have been with combinations of glyphosate + FirstRate, glyphosate + Classic, or glyphosate + Synchrony. However, some marestail may also be resistant to Classic, FirstRate, and Synchrony and control may be marginal. 

Another option to control marestail in soybean is to plant Liberty Link soybeans and use Liberty herbicide. It is important to remember that Liberty can only be applied postemergence on Liberty Link soybeans.

 

Dallas Peterson, Weed Management Specialist
dpeterso@ksu.edu

Doug Shoup, Southeast Area Crops and Soils Specialist
dshoup@ksu.edu